Views: 3 Author: Site Editor Publish Time: 2021-08-20 Origin: Site
LED flood lights are widely used in gardens, backyards, garages, parking lot lighting, etc. LED flood lights do not need to be fixed to walls, floors or other places. Easy to install and no special tools are required. Let's see how to install LED flood lights safely! All the electrical equipment must pay attention to safety!
This passage is going to talk about the following advantages of solar LED flood light:
1) Introduction to solar LED flood light
2) Steps to install LED flood lights
3) Aftercare of solar LED flood light installation
It has long been known that bright light will deter thieves and novices alike, but before the advent of solar lighting, homeowners either had to be experienced in wiring or hire a professional electrician to install outdoor lights. Today's solar flood lights open up a whole new world of lighting that is affordable, powerful, and most importantly, easy to install.
The best solar flood light for your house will depend on the size of the area you want to illuminate and whether you want to keep the light on or only light it when motion is detected. Learn ahead of time what to look for when buying solar flood lights and find out why the following options are good choices for most people.
When installed, solar flood lights don't cost a dime; their built-in solar panels collect energy from the sun and store it in an internal battery until nighttime. You can install solar flood lights almost anywhere, although they will provide the brightest light if they are in direct sunlight during the day.
Step 1. Turn off the main power supply. First, for safety reasons, turn off the main power supply.
Step 2. Connect the wires to the LED flood light. After fixing the lighting assembly, please connect the LED flood light wires according to the markings of fire wire, zero wire and ground wire.
Step 3. Adjust the angle of the LED flood light. After connecting the light wires, use an open-end wrench to adjust the projection angle of the LED flood light.
Step 4. Finally, turn on the power and test the installed LED flood light. After installation, please turn on the switch and test if the indicator light is lit. If so, the LED flood light installation is complete.
After installing the new solar LED flood light, check to make sure it is working properly.
Turn the breaker box switch to ON to turn the power back on in the installation area.
After the current has flowed, create motion under the solar LED flood light and then check to see if the light responds.
If the light does not come on, use the breaker box to turn off power to the area and double check your work for misplaced wires or other installation problems.
When the flood light is fully operational, adjust the angle of its bulb as needed to achieve maximum light coverage.
Once you are satisfied with the basic functionality of your new luminaire, set any relevant settings such as timers, smart functions and sensitivity levels. All specific instructions can be found in the manufacturer's operating instructions.
LED solar flood lights offer ecological, aesthetic and environmental benefits and have great potential use in the commercial sector. They can be safely used for both indoor and outdoor lighting. If you have any needs, you can contact us directly. We are at your service at any time.